The AVEP charger is for PDA and digital camera Li-ion batteries. It is suitable for different battery models to use,only to change the plate which is located on the top of the charger.
(A) How to change the charger plate
Part I : Release the charger plate
Step 1:
Press and hold the button to unlock the charger plate.
Step 2:
Pull out to release the charger plate.
Step 3:
Took out the plate.
Part II : Install the new charger plate
Step 1:
Ready a new charger plate, and attach the charger plate on the top of charger base.
Step 2:
Push the charger plate in with the direction show on the above figure.
Step 3:
Complete the installation.
(B) Charging method
Connect the charger USB plug to the desktop or laptop computer USB socket and start to charge your battery.
(C) Check the charging status
The LED indicator will show for you the charging status.
Here are the steps for using the charger
1. Connect the charger USB plug to the computer USB socket.
2. The LED indicator will not glow when waiting for battery pack.
3. Slide battery pack into the charger the LED indicator turns RED when charging.
4. The LED indicator will not glow when the battery pack is fully charged.
5. After the battery pack fully charged, slide the battery pack out and disconnect the charger.
Charger Base
AVEP
Charger Base
Size:
86.00 x 48.80 x 25.70 mm
Weight:
57.95 g
Charger Plate
ACP605
Charger Plate
Size:
79.98 x 48.00 x 16.80 mm
Weight:
22 g
Standard
Standard A
Dimension: 164.00 x 116.00 x 61.00 mm
Weight: 48.9 g
Standard B
Dimension: 25.00 x 55.00 x 95.00 mm
Weight: 7.7 g
Standard C
Dimension: 92.00 x 72.00 x 19.00 mm
Weight: 6.35 g
Optional
Optional A
Dimension: 140.00 x 176.00 x 66.00 mm
Weight: 45.95 g
Optional B
Dimension: 176.00 x 140.00 x 66.00 mm
Weight: 45.95 g
Remark :For Full Set "Charger Base + Charger Plate "
